مهندسی برق قدرت - الکترونیک



Ali Ghaznavi Mohammad Ebrahim Hajiabadi; Mansour Khaliliyan


DOI: 

https://doi.org/10.1007/s40998-019-00212-8


Abstract:

This paper presents a structural decomposition of generation of units based on the Karush–Kuhn–Tucker equations for a market problem with DC load flow. To achieve this aim, the mechanism for the discovery of electricity price is first restated and formulated. The Lagrangian method is then employed, to structurally decompose the generation of units into five components, each of which indicates distinct physical information. The first component consists of the weighted sum of the congestion lines. The second component consists of the weighted sum of the strategies of the marginal units. Awareness of this segment helps units’ owners to exercise market power. The third and fourth components are the weighted sum of low- and high-cost units’ generation, respectively. The fifth component is the weighted sum of load buses. The proposed decomposition leads to significant information regarding the generation of marginal units. The weighting coefficients of these terms indicate the sensitivity of the generations of marginal units to the capacity of congested lines, bidding strategies of marginal units, the capacity of low-cost units, the minimum generation of high-cost units and load buses, respectively. Furthermore, the decomposition of generation into the constitutive components reveals the contribution of congestion lines, GenCos and load buses to the generation of the marginal unit g. The simulation results of the IEEE

24-bus modified reliability test system demonstrate the efficiency of the proposed approach.


نویسندگان: علی غزنوی; کارشناس ارشد؛ محمد ابراهیم حاجی آبادی، استادیار؛ منصور خلیلیان، کارشناس ارشد

چکیده:

هدف از این مقاله بررسی تحلیلی تلفات شبکه در سطوح مختلف بار میباشد. برای رسیدن به این هدف ابتدا در گام اول برنامه بازار اجرا شده و در لم 1 و با کمک ضرایب لاگرانژ مولفه های ساختاری مؤثر بر تولید واحدها بدست آمده است. با کمک تجزیه ساختاری انجام شده، بصورت تحلیلی حساسیت تولید هر واحد بر تغییر بار هر باس بدست آمده است. در گام دوم، در لم 2 رابطه ای تحلیلی بین تغییر توان انتقالی خطوط و تغییر بار بهدست آورده شده است. در نهایت به کمک نتایج لمهای یک و دو، شاخص تلفات برای هر باس LIn و شبکه LIsys بهصورت تحلیلی ارائه شده است. LIn بیانگر تغییر تلفات شبکه به ازاء تغییر بار باس n میباشد. انتظار میرود که LIn همواره مثبت باشد، اما با توجه به برنامه بازار، مکان نقاط بار و تولید و نیز تراکم، مقدار LIn میتواند بر خلاف انتظار منفی گردد. این موضوع برای شاخص LIsys نیز صادق است. در این مقاله نقطه بحرانی بار برای هر باس و نیز کل شبکه از دیدگاه تلفات شبکه به عنوان میزانی از بار باس و یا شبکه که شاخص LIn برای هر باس و یا LIsys برای شبکه تغییر علامت میدهد، تعریف شده است. بعلاوه ناحیه ای از بار که شبکه دارای بیشترین تلفات میباشد نیز بعنوان ناحیه بحرانی بار از دیدگاه تلفات تعریف میگردد. ناحیه های بحرانی بار از دیدگاه تلفات میتواند در تصمیم گیری جهت مکانهای اعمال ت های مدیریت مصرف مفید باشد. در انتها مطالعات بر روی سه شبکه استاندارد IEEE انجام شده است.

نشریه علمی پژوهشی مهندسی برق دانشگاه تبریز

دانلود متن کامل مقاله از لینک زیر:

http://tjee.tabrizu.ac.ir/volume_1005.html



Title: Cost‐worth analytical assessment of demand‐side management (DSM) programs, considering energy losses with the structural generation decomposition: A market‐based approach

Summary

This paper presents an integrated framework for the cost‐worth analytical assessment of demand‐side management (DSM) programs, considering energy losses. This goal is achieved in 3 steps. At first, after solving the market problem, the sensitivity of each line flow to the each load bus is analyzed by using the structural generation decomposition, considering network congestion. Then, the Loss Index is analytically defined by using the sensitivity factors. Finally, the energy loss and the cost variation due to applying DSM programs are analytically decomposed. The energy loss variation is divided up into 2 terms: the energy loss variation at pick hours and off‐pick period. The total cost variation consists of 3 terms: the cost of energy losses, market, and DSM activities. The proposed approach can be used to indicate the appropriate busses and network for applying DSM programs considering the energy losses. The numerical results of Institute of Electrical and Electronics Engineers 24‐bus test system demonstrate the efficiency of the method.


https://onlinelibrary.wiley.com/doi/abs/10.1002/etep.2584


آخرین ارسال ها

آخرین وبلاگ ها

آخرین جستجو ها